VPN IPSec/Site-to-Site Tunnel

For the site-to-site VPN, Softdrive will need to know the following pieces of information.

1. Public IP of the CPE (VPN Endpoint/Appliance) and the device model and manufacturer (ex: Fortinet, Sonicwall, Palo Alto etc...)
2. The subnet(s) to route traffic to.

Once Softdrive has this information we can get the VPN configured and send you the information required to have it initiated on your side. This information will be the IP addresses and the IPsec keys, there are two entries needed so that you can set up an active/passive VPN configuration for HA.

These are the supported IPsec parameters that can be used for the tunnel:  https://docs.oracle.com/en-us/iaas/Content/Network/Reference/supportedIPsecparams.htm